PicoTurn Rotational Speed Sensor
Industry Leader & World Supplier of PicoTurn Systems
PicoTurn systems are used to measure turbocharger rotational speed with high accuracy. PMT has been the Sales and Technical support channel for PicoTurn products for over 20 years. We are the ONLY TECHNOLOGY CENTER with the ability to calibrate turbocharger rotational speed sensor signal conditioning boxes.
PicoTurn is a test system for measuring turbocharger rotational speed using the eddy current reduction technique. This technique directly senses each vane of the turbocharger wheel with a speed sensor that is mounted in a hole bored into the turbocharger housing. PicoTurn measures rotational speeds to 400,000 rpm, requires no modification of rotating parts, and senses the compressor wheel directly. It is compatible with single and two-stage turbocharger systems.
PicoTurn turbo speed sensor offers IP67 compliant sensors, standard digital TTL and CMOS output signals, compact housing, and a programmable number of vanes. The system has open architecture and works well stand alone or fits easily into another measurement system. PicoTurn rotational speed sensor is ideal for engine testing in passenger cars and commercial vehicles, as well as other applications that require high precision rotational measurement.
Rotational Speed Sensor Technology Features
The PicoTurn integrated circuits are realized without any analog component. Again, ScioSense (previously Acam) uses its TDC technology to set new standards in circuit design and takes the advantages of this principle like:
- Measuring principle: Attenuation by eddy currents
- Sensing directly the compressor wheel
- Fully integrated sensor electronics
- Self-adjustment simplifies mounting
- Comfortable spacing sensor-wheel
- Suitable even for small compressor wheels (32mm)
- No modification of rotating parts
- Rotational speeds up to 400.000 rpm
- Optional signal conditioning with PT2G-BX, PT2G-BD
- Analog output (0.5 – 4.5 V)
- Digital output (TTL, 50% duty cycle)
- Number of vanes programmable (1-31)
- Compact housing (105 x 30 x 85mm³)
Applications
- Turbocharger speed sensing and measurement
- Engine test cells
- Test car instrumentation
- Gear speed
- Vane speed for various wheels and materials
PICOTURN – Rotational Speed Sensing
Additional Information
Documentation & Downloads
Datasheet
Application Notes
PCN/PDN (Product Change / Discontinuation Notes)
Datasheet
Application Notes
PCN/PDN (Product Change / Discontinuation Notes)
Picoturn Measuring Principle
Rotational Speed Sensor for Turbochargers
The sensor is made of a simple coil with a ferrite core. Together with a resistor this forms an R-L network, the time constant of which is measured by a TDC. Placing a vane of the compressor wheel in front of the coil will change the time constant of the R-L network by the appearance of eddy currents. A DSP-unit following the TDC measurement unit processes the time data and calculates the rotational speed.
The time measurement is done with very high precision. The resolution is about 125 ps. The time constant of the R-L network can be very small, allowing high sampling rates in the range of 1 to 3 million samples per second.
The effect of eddy current damping is best for paramagnetic materials. This method therefore is very good for detecting aluminum wheels.
The maximum distance of the sensor from the wheel depends on the shape of the vanes. It varies from 0.8 mm (32 mm wheels) to 1.6 mm than 1 mm (90 mm wheels). Thanks to the ratio measurement any trimming of the coils is not necessary. The length of the cable between sensor and circuit may be up to several meters. This allows to separate the electronics part from the sensing part, reducing thermal and vibrational influences on the electronics.
The special kind of measurement reduces the influence of changes in the dielectric constant (e.g. by dirt) to a minimum.
Ordering Numbers
PT2G (Second Generation):
Product(Sensors)PT2G-SM5.3 |
DescriptionIntelligent sensor with integrated signal processing and TTL output, sensor length 60 mm / 54 mm thread, 230°C |
Part NoMNR 1537 |
Product(Sensors)PT2G-SM5.5 |
DescriptionIntelligent sensor with integrated signal processing and TTL output, sensor length 46 / 40 mm tread, 230°C |
Part NoMNR 1591 |
Product(Sensors)PT2G-SM5.6 |
DescriptionIntelligent sensor with integrated signal processing and TTL output, sensor lenght 75 / 69 mm tread, 230°C |
Part NoMNR 1660 |
Product(Sensors)PT2G-SM5F.2 |
DescriptionIntelligent sensor with integrated signal processing and TTL output, sensor lenght 75 / 69 mm fine read, 230°C |
Part NoMNR 1590 |
Product(Sensors)PT2G-SM5F.3 |
DescriptionIntelligent sensor with integrated signal processing and TTL output, sensor length 56 / 40 mm fine thread, 230°C |
Part NoMNR 1538 |
Product(Sensors)PT2G-SM5F.5 |
DescriptionIntelligent sensor with integrated signal processing and TTL output, sensor length 76 / 60 mm fine thread, 230°C |
Part NoMNR 1666 |
Product(Accessories)PT2G-BX |
DescriptionSignal conditioning box with RS232 interface |
Part NoMNR 1526 |
Product(Accessories)PT2G-BD |
DescriptionSignal conditioning box with display |
Part NoMNR 1527 |
Product(Accessories)PT2G-XS-01.5 |
DescriptionAdapter cable, interconnecting PT2G-SM…sensor and PT2G-B…signal conditioning box, 1,5 m lenght |
Part NoMNR 1771 |
Product(Accessories)PT2G-XS-03 |
DescriptionCable connecting sensor and signal conditioning box, 3 m length |
Part NoMNR 1569 |
Product(Accessories)PT2G-XS-05 |
DescriptionCable connecting sensor and signal conditioning box, 5 m length |
Part NoMNR 1539 |
Product(Accessories)PT2G-XS-10 |
DescriptionCable connecting sensor and signal conditioning box, 10 m length |
Part NoMNR 1540 |
Product(Accessories)PT2G-C-2U |
DescriptionPower supply cable , open end, 2 m length |
Part NoMNR 1542 |
Product(Accessories)PT2G-C-2B&2BNC |
DescriptionCombination cable for power supply and signals(2 x BNC, 2 X “banana” 4 mm), lenght 3 m / 3.6 m |
Part NoMNR 1659 |
Product(Accessories)PT2G-X-CT |
DescriptionCable, interconnecting PT2G-B…box and PICOTRUN-CT calibration device |
Part NoMNR 1543 |
Product(Accessories)PT2G-CCT |
DescriptionCable connecting PT2G-BD to PICOTURN-CT calibration device |
Part NoMNR 1767 |
Product(Accessories)PT2G-C-CSM2M |
DescriptionCable, connecting one PT2G sensor to a “CNTMM” counter minimodule by GSM GmbH, lenght 2m (also available in 10m) |
Part NoMNR 1963 |
Product(Accessories)PT2G-C-ETAS_E441 |
DescriptionCable connecting two sensors PT2G to one “E441” module by ETAS GmbH, lenght: 2m |
Part NoMNR 1984 |
Product(Accessories)PT2G-C-IPTRKLM |
DescriptionCable. connecting one PT2G sensor to an IPETRONIK “SIM_CNT” or “-FRQ” counter module |
Part NoMNR 1667 |
PICOTURN-BM/SM (First Generation)
Product(Controller Unit)PICOTURN-BM V6 |
DescriptionController with BNC output connectors for 8 to 30 V power supply |
Part NoMNR 1242 |
Product(Sensors)PICOTURN-SM5.1 |
DescriptionSensor M5, L=60 mm, 1.5 m cable length, for temperatures up to 180°C |
Part NoMNR 586 |
Product(Sensors)PICOTURN-SM5.2 (*) |
DescriptionSensor M5 L=60 mm, with reduced head diameter (3.6 mm), 1.5 m cable length, 180°C |
Part NoMNR 607 |
Product(Sensors)PICOTURN-SM5.3 |
DescriptionLike SM5.1 but for high temperatures up to 230°C |
Part NoMNR 933 |
Product(Sensors)PICOTURN-SM5.5 (*) |
DescriptionSensor M5 L=46 mm, 1.5 m cable length, 230°C |
Part NoMNR 998 |
Product(Sensors)PICOTURN-SM5.5L (*) |
DescriptionSensor M5 L=46 mm, 2.0 m cable length, 230°C |
Part NoMNR 1108 |
Product(Sensors)PICOTURN-SM5.6 (*) |
DescriptionSensor M5 L=75 mm, 1.5 m cable length, 230°C |
Part NoMNR 1059 |
Product(Sensors)PICOTURN-SM5.7 (*) |
DescriptionSensort M5 L=45 mm, with reduced head diameter (3.6 mm), 1.5 m cable length, 180°C |
Part NoMNR 1065 |
Product(Sensors)PICOTURN-SM5F.2 |
DescriptionSensor M5 fine thread for high temperature range up to 230°C, L=41 mm, 1.5m cable length |
Part NoMNR 934 |
Product(Sensors)PICOTURN-SM5F.3 (*) |
DescriptionSensor M5 fine thread for high temperatures up to 230°C, L=56 mm, 1.5 m cable length |
Part NoMNR 1081 |
Product(Sensors)PICOTURN-SM5F.3L (*) |
DescriptionSensor M5 fine thread for high temperatures up to 230°C, L=56 mm, 2.0 m cable length |
Part NoMNR 1109 |
Product(Accessories)PICOTURN-CT |
DescriptionCalibration Device for PICOTURN-BM controllers |
Part NoMNR 890 |
Product(Accessories)PT2G-C-2B |
DescriptionPower supply cable, 4 mm “banana” connectors, 2 m lenght |
Part NoMNR 1541 |
Product(Accessories)Extension cable |
Description1.5 m SMB-SMB, for sensors |
Part NoMNR 594 |
Product(Accessories)Extension cable (**) |
Description2.5 m SMB-SMB, for sensors |
Part NoMNR 707 |
Product(Accessories)Clamping nut |
Descriptionfor M5 fine thread sensors -SM5F.x |
Part NoMNR 696 |
Ordering Numbers
PT2G (Second Generation):
Product(Sensors)PT2G-SM5.3 |
DescriptionIntelligent sensor with integrated signal processing and TTL output, sensor length 60 mm / 54 mm thread, 230°C |
Part NoMNR 1537 |
Product(Sensors)PT2G-SM5.5 |
DescriptionIntelligent sensor with integrated signal processing and TTL output, sensor length 46 / 40 mm tread, 230°C |
Part NoMNR 1591 |
Product(Sensors)PT2G-SM5.6 |
DescriptionIntelligent sensor with integrated signal processing and TTL output, sensor lenght 75 / 69 mm tread, 230°C |
Part NoMNR 1660 |
Product(Sensors)PT2G-SM5F.2 |
DescriptionIntelligent sensor with integrated signal processing and TTL output, sensor lenght 75 / 69 mm fine read, 230°C |
Part NoMNR 1590 |
Product(Sensors)PT2G-SM5F.3 |
DescriptionIntelligent sensor with integrated signal processing and TTL output, sensor length 56 / 40 mm fine thread, 230°C |
Part NoMNR 1538 |
Product(Sensors)PT2G-SM5F.5 |
DescriptionIntelligent sensor with integrated signal processing and TTL output, sensor length 76 / 60 mm fine thread, 230°C |
Part NoMNR 1666 |
Product(Accessories)PT2G-BX |
DescriptionSignal conditioning box with RS232 interface |
Part NoMNR 1526 |
Product(Accessories)PT2G-BD |
DescriptionSignal conditioning box with display |
Part NoMNR 1527 |
Product(Accessories)PT2G-XS-01.5 |
DescriptionAdapter cable, interconnecting PT2G-SM…sensor and PT2G-B…signal conditioning box, 1,5 m lenght |
Part NoMNR 1771 |
Product(Accessories)PT2G-XS-03 |
DescriptionCable connecting sensor and signal conditioning box, 3 m length |
Part NoMNR 1569 |
Product(Accessories)PT2G-XS-05 |
DescriptionCable connecting sensor and signal conditioning box, 5 m length |
Part NoMNR 1539 |
Product(Accessories)PT2G-XS-10 |
DescriptionCable connecting sensor and signal conditioning box, 10 m length |
Part NoMNR 1540 |
Product(Accessories)PT2G-C-2B |
DescriptionPower supply cable, 4 mm “banana” connectors, 2 m lenght |
Part NoMNR 1541 |
Product(Accessories)PT2G-C-2U |
DescriptionPower supply cable , open end, 2 m length |
Part NoMNR 1542 |
Product(Accessories)PT2G-C-2B&2BNC |
DescriptionCombination cable for power supply and signals(2 x BNC, 2 X “banana” 4 mm), lenght 3 m / 3.6 m |
Part NoMNR 1659 |
Product(Accessories)PT2G-X-CT |
DescriptionCable, interconnecting PT2G-B…box and PICOTRUN-CT calibration device |
Part NoMNR 1543 |
Product(Accessories)PT2G-CCT |
DescriptionCable connecting PT2G-BD to PICOTURN-CT calibration device |
Part NoMNR 1767 |
Product(Accessories)PT2G-C-CSM2M |
DescriptionCable, connecting one PT2G sensor to a “CNTMM” counter minimodule by GSM GmbH, lenght 2m (also available in 10m) |
Part NoMNR 1963 |
Product(Accessories)PT2G-C-ETAS_E441 |
DescriptionCable connecting two sensors PT2G to one “E441” module by ETAS GmbH, lenght: 2m |
Part NoMNR 1984 |
Product(Accessories)PT2G-C-IPTRKLM |
DescriptionCable. connecting one PT2G sensor to an IPETRONIK “SIM_CNT” or “-FRQ” counter module |
Part NoMNR 1667 |
PICOTURN-BM/SM (First Generation)
Product(Controller Unit)PICOTURN-BM V6 |
DescriptionController with BNC output connectors for 8 to 30 V power supply |
Part NoMNR 1242 |
Product(Sensors)PICOTURN-SM5.1 |
DescriptionSensor M5, L=60 mm, 1.5 m cable length, for temperatures up to 180°C |
Part NoMNR 586 |
Product(Sensors)PICOTURN-SM5.2 (*) |
DescriptionSensor M5 L=60 mm, with reduced head diameter (3.6 mm), 1.5 m cable length, 180°C |
Part NoMNR 607 |
Product(Sensors)PICOTURN-SM5.3 |
DescriptionLike SM5.1 but for high temperatures up to 230°C |
Part NoMNR 933 |
Product(Sensors)PICOTURN-SM5.5 (*) |
DescriptionSensor M5 L=46 mm, 1.5 m cable length, 230°C |
Part NoMNR 998 |
Product(Sensors)PICOTURN-SM5.5L (*) |
DescriptionSensor M5 L=46 mm, 2.0 m cable length, 230°C |
Part NoMNR 1108 |
Product(Sensors)PICOTURN-SM5.6 (*) |
DescriptionSensor M5 L=75 mm, 1.5 m cable length, 230°C |
Part NoMNR 1059 |
Product(Sensors)PICOTURN-SM5.7 (*) |
DescriptionSensort M5 L=45 mm, with reduced head diameter (3.6 mm), 1.5 m cable length, 180°C |
Part NoMNR 1065 |
Product(Sensors)PICOTURN-SM5F.2 |
DescriptionSensor M5 fine thread for high temperature range up to 230°C, L=41 mm, 1.5m cable length |
Part NoMNR 934 |
Product(Sensors)PICOTURN-SM5F.3 (*) |
DescriptionSensor M5 fine thread for high temperatures up to 230°C, L=56 mm, 1.5 m cable length |
Part NoMNR 1081 |
Product(Sensors)PICOTURN-SM5F.3L (*) |
DescriptionSensor M5 fine thread for high temperatures up to 230°C, L=56 mm, 2.0 m cable length |
Part NoMNR 1109 |
Product(Accessories)PICOTURN-CT |
DescriptionCalibration Device for PICOTURN-BM controllers |
Part NoMNR 890 |
Product(Accessories)PT2G-C-2B |
DescriptionPower supply cable, 4 mm “banana” connectors, 2 m lenght |
Part NoMNR 1541 |
Product(Accessories)Extension cable |
Description1.5 m SMB-SMB, for sensors |
Part NoMNR 594 |
Product(Accessories)Extension cable (**) |
Description2.5 m SMB-SMB, for sensors |
Part NoMNR 707 |
Product(Accessories)Clamping nut |
Descriptionfor M5 fine thread sensors -SM5F.x |
Part NoMNR 696 |